Bird spikes are a good and bearable way of preventing birds from sitting, coming to rest, or nesting on the ledges, rooftops, or any part of your property. There are several birds such as seagulls and pigeons who leave messes, debris, noise, and great destruction to surfaces. When such bird spikes are installed, it is a measure that provides a long-term solution towards these problems. However, bird spikes in dubai can only work if installed the right way. In this article, we will discuss in detail the best way to install bird spikes- preparing for the spikes, installing them, and maintaining them.
Advantages of Bird Spike Installation
Containment of Destruction and Dirt
Birds spikes provide discomfort to birds when they try to land there and, therefore, roosting, and nesting is not possible. When the birds do not have an area they call home, they go to a different place. This assists in minimizing the amount of damage that will occur on the outdoor and building structures owing to bird droppings that are known to be acidic in nature, thus capable of eating away certain components such as metal, wood, and paint. The droppings may also pose health risks and attract pests if destroying them frequently is not compulsory.
Humane Deterrent
Bird spikes have been described as humane since they do not cause any injuries to birds. Rather, their purpose is to prevent the birds from perching in certain regions. This is a significant point since there are various other ways of bird control, such as nets or poisons, that cause suffering or death to the birds. Bird spikes are useful for protecting one’s property in a non-harmful manner to the birds.
Step by Step Instructions on How to Fixate Bird Spikes
A proper placement of bird spikes is vital to ensure that they work as intended. In this section, the reader is guided through the steps to follow during the installation of bird spikes for total safety.
Check the Site
First, before they can even think of going out to buy the bird spikes, the site where the birds are creating nuisance should be checked out beforehand. Locate ledges, beams, window sills or other regions where birds are known to perch frequently. Also measure the length and width of these regions so that you know how many bird spikes are required by you.
Bird spikes come in different sizes and lengths, so measure each section carefully. Some kits include lower spikes for slimmer edges and expansive edges for more massive surfaces too. Make sure to choose the right size for the area you’re protecting.
Clean the Surface
For tooth attachments to work properly, bird spikes need to be installed on a clean surface. It is essential to have a clear area devoid of any bird droppings, dirt and dust, or debris prior to installation. For solid waste, use a stiff brush or scraper and then take a cleaning solution to disinfect the surface.
As bird droppings may contain bacteria, it is advised to use gloves and face masks if available. Wait for an area to dry up a little before applying the adhesive, as this may affect bonding.
Choose the Right Type of Bird Spikes
Not all birds‘ spikes are the same; there are different types which are designed for different areas and species of birds. Some of the common types include:
Plastic Bird Spikes: Great for sun-exposed areas because these are light-weight, low-cost and UV-resistant.
Stainless Steel Bird Spikes: These are stronger and more corrosion-resistant, so they’re perfect for outdoor use where they could be exposed to the elements for a long period of time.
Prepare for Permant Placement
After having founded the right bird spike for yourself, refrain from fixing them permanently until you have drawn the layout. Place the spike strips on the surface to check for overlap and ensure that all areas are covered with no gaps. Birds are opportunistic and make the most fora any gaps that remain. This means that the tips should be end-to-end or have slight overlaps to make it hard for birds to settle.
For people with larger ledges, it may become necessary to place two or more rows of spikes at once, so that the chances of a bird landing in the middle are reduced.
Adhesive or Screws
There are two main ways of placing bird spikes, either by adhesive or by screws.
How to Attach Using Adhesive
Bird spikes are most frequently installed by gluing them to a surface. Use an adhesive sealant that withstand extreme temperatures such as silicone adhesive or construction grade glue. Run a bead of adhesive the entire length of the base of the bird spike strip making sure there are no bare spots. Now, using your hand, press the strip into the surface securely.
Keep the strip in place for around 5 seconds to allow it to stick properly. Proceed with this for all other stripes ensuring that there are no gaps while placing the stripes.
Screws Installation
Where more toughness is needed, for instance, in the case of wooden beams or in difficult corners, bird spikes can be held in position using screws or nails. Most of the bird spike strips come with holes for screwing in spikes.
Drill pilot holes in the surface and then fix screws into the avian spile strip with the holes that were screwed in the first place. Fitting these screws again makes sure that the strip is made tight. This is very helpful in places where there are large winds or glue cannot hold well.
Evaluating the Installation
Once the golden touch has installed the avian repellents do step away, and look around the corners to see if all the spaces that needed protection have been covered well. Verify that the spires have been placed correctly such that no ledges have been created for the birds to sit on.
You can easily do it by thrusting the rods on the spines and seeing if they move. In case any spines wiggle, then apply more adhesive or tighten screws to those areas to make it firm.
Maintenance and Long-Term Care
Inspect Regularly
To get the best performance out of bird spikes, they must be cleaned and inspected after regular intervals. These spikes should be given a check at least once in a couple of months. Ensure that the nests haven’t accumulated on the spikes and are intact and secure in position. Remember, birds can build nests around or atop bird spikes, so removing any materials that weakens the effectiveness of the spikes is encouraged.
Clean the Spikes
Bird spikes, over time, become dirty due to accumulation of filth and dust. Such elements can also lessen their effectiveness by creating perching areas for the birds. Remove spikes from the slip, but only if it has become necessary to do so. Make sure all the children’s toys are out of reach and any nesting materials are discarded. Gloves are necessary to prevent any contact with bird feces.
Replace Damaged Spikes
If there are sections of the bird spikes which are broken, they should not be covered. They are to be replaced immediately to prevent birds from entering parts that can be dangerous. This may lead to a deterioration in the quality of overall protection. These can be very easily replaced if kept in stock.
Conclusion
Correctly placed bird spikes can help to deter birds and, as a result, protect the property. The use of the appropriate spikes, the correct preparation of the surface, and the effective positioning of the spikes allow the installation of a birdproof system on the property. Regular checks and servicing will enhance the effectiveness of the spikes maintaining bird activity for long periods within any residential or commercial setting. Bird spikes, if well installed, are also humane means of bird control with minimal regrets.
